PacketRaven Network TAP

Modular Fiber, Passive, & Secure TAP

Contact Neox
Modular Network TAP
shop online

Full Network Visibility up to 400G

Full Network Transparency | 100% Passive | Extra Secure Modular Network TAP Models for CRITIS Available

Network Transparency
Network Data Traffic
Network Data
Network Monitoring
Network TAP
Power Supply
Various Split Ratios
Network TAP
Network TAP
Network TAP
Network Data
Network Data
REQUEST DEMO

GRASSROOT LEVEL NETWORK VISIBILITY

Industry's Highest Density Modular Network TAP

Real-Time Network Data-in-Motion and Network Intelligence Access

NEOX FIELD-PROVEN SOLUTION

Modular Network TAP

Modular Network TAP

Modular Network TAP

PacketRaven Modular Network TAP

The NEOX PacketRaven Modular Network TAP is a high-density, scalable fiber TAP solution tailored for modern data centers requiring uncompromised visibility at ultra-high speeds. Designed to passively mirror traffic with no packet loss, it supports network speeds from 1-400Gbps per TAP, offering complete visibility including FCS/CRC errored packets typically dropped by SPAN ports. Its modular 1U chassis accommodates up to 30 TAP modules, making it the most high-density and space-efficient solution in the industry. Operating entirely passively—without fans or power—these TAPs are invisible on the network, having no IP or MAC address, and cannot be detected or hacked. By functioning at OSI Layer 1, they offer 100% reverse-path isolation through the NEOX Data Diode function, guaranteeing total traffic separation and ensuring monitoring tools cannot affect live network data.
Using high-precision optical prisms, PacketRaven Modular TAPs split the optical signal, allowing a portion to continue along the network path while simultaneously directing mirrored traffic to a monitoring port. This protocol-independent method ensures compatibility with multi-mode, single-mode, and BiDi fiber networks, across all wavelengths and speeds. Available split ratios—50:50 to 90:10—allow fine-tuning of optical loss to match specific deployment needs, with typical attenuation around 2dB (network) and 6dB (monitoring) for a 70:30 split. In addition, these TAPs include optical filtering to block unwanted signals, and secure variants for CRITIS and IEC 62443-compliant infrastructures.
Whether you’re tapping 1G or 400G links, PacketRaven Modular TAPs provide uninterrupted, lossless, and secure data access. Their tool-port isolation ensures risk-free, passive monitoring and network forensics. For portable deployment needs, PacketRaven Portable TAPs are also available and can be integrated into 1U rackmount frames.

Modular Network TAP
Modular Network TAP
Modular Network TAP
Modular Network TAP
PACKETRAVEN TAP MODELS SINGLEMODE LC
All TAPs for fiber type OS2 are also OS1 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
 PRM-OS2-LL 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OS2 1260 nm – 1650 nm LC LC 50:50, 60:40 or 70:30 1
 
PACKETRAVEN TAP MODELS SINGLEMODE MTP
All TAPs for fiber type OS2 are also OS1 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
 PRM-OS2-MTP 40G/100G/ 200G/400G OS2 1310 nm – 1550 nm MTP®/MPO MTP®/MPO 50:50*, 60:40 or 70:30 2
PRM-OM3-LL 1G/10G/25G/50G OM3 850 nm LC LC 50:50, 60:40 or 70:30 1
PRM-OM4-LL 1G/10G/25G/50G OM4 850 nm LC LC 50:50, 60:40 or 70:30 1
PRM-OM5-LL 1G/10G/25G/ 50G/100G OM5 850 nm – 950 nm LC LC 50:50, 60:40 or 70:30 1
PRM-OM4-MM 40G/100G/ 200G/400G OM4 850 nm MTP® MTP® 50:50, 60:40 or 70:30 2
 PRM-OM5-MM-50 40G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® 50:50, 60:40 or 70:30 2
PRM-OM5-BD-LL 40G/100G OM5 830 nm – 950 nm LC LC 50:50, 60:40 or 70:30 2
* recommended   
PACKETRAVEN SECURE TAP MODELS MULTIMODE
All TAPs for fiber type OM5 are also OM4 compatible! All TAPs for fiber type OM4 are also OM3 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
PRM-OM3-LL-S 1G/10G/25G/50G OM3 850 nm LC LC 50:50 or 70:30 1
PRM-OM4-LL-S 1G/10G/25G/50G OM4 850 nm LC LC 50:50 or 70:30 1
PRM-OM5-LL-S 1G/10G/25G/50G OM5 850 nm – 950 nm LC LC 50:50 or 70:30 1
PacketRaven Modular LC Fiber Network TAP - OS2
PacketRaven Modular LC Fiber Network TAP - OS2/OM4/OM5
PacketRaven Modular LC Fiber Network TAP - OM3
PacketRaven Modular LC Fiber Network TAP - OM4
PacketRaven Modular LC Fiber Network TAP - OM5

OS2 LC network TAP

OM5 LC network TAP

OS2 MTP® Network TAP

OM3 LC network TAP

OM4 LC network TAP

PacketRaven Modular LC Fiber Network TAP - OS2/OM4/OM5
PacketRaven Modular LC Fiber Network TAP - OS2/OM4/OM5
PacketRaven Modular LC BiDi Fiber Network TAP - OM5

OM4 MTP network TAP

OM5 MTP network TAP

BIDI network TAP

  • Supported network speeds: 100M, 1G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 and partially 80:10:10 are supported. Further split ratios on request.
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Bi-directional (BiDi) models available
  • Designed, assembled, certified and tested in Germany
 
SPECIFICATIONS
Height x Width x Depth (Chassis)4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature-40°C – +85°C
Relative Operating Humidity5% – 95%
ReliabilityGR-1221-CORE
 
shop online
Product brief
Data Sheet
quick user quide

Fiber Singlemode OS2 LC - Modular Network TAP

OS2 LC TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 100M, 1G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Dual port model available
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Singlemode LC1260 nm – 1650 nmOS1, OS2
Singlemode LC Dual Port1310 nmOS1, OS2
SPECIFICATIONS
Height x Width x Depth (Chassis)4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature-40°C – +85°C
Relative Operating Humidity5% – 95%
ReliabilityGR-1221-CORE
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request)50:5060:4070:3080:10:10
Singlemode LC OS1, OS23.4 dB / 3.4 dB2.5 dB / 4.5 dB1.7 dB / 5.8 dB1.5 dB / 11.5 dB / 11.5 dB
PACKETRAVEN TAP MODELS SINGLEMODE MTP
All TAPs for fiber type OS2 are also OS1 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
 PRM-OS2-LL 40G/100G/ 200G/400G OS2 1310 nm – 1550 nm LC LC 50:50*, 60:40 or 70:30 1
* recommended
DATASHEET
quick user quide

Fiber Singlemode OS2 MTP® - Modular Network TAP

OS2 MTP® TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 40G, 100G, 200G, and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Singlemode MTP 1310 nm – 1550 nm OS1, OS2
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Singlemode MTP OS1, OS2 4.1 dB / 4.1 dB 3.2 dB / 5.2 dB 2.4 dB / 6.5 dB
PACKETRAVEN TAP MODELS SINGLEMODE MTP
All TAPs for fiber type OS2 are also OS1 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
 PRM-OS2-MTP 40G/100G/ 200G/400G OS2 1310 nm – 1550 nm MTP®/MPO MTP®/MPO 50:50*, 60:40 or 70:30 2
* recommended
DATASHEET
quick user quide

Fiber Multimode OM3 LC - Modular Network TAP

OM3 LC TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds:  1G, 10G, 25G, 50G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm OM3, OM4
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PACKETRAVEN TAP MODELS MULTIMODE OM3
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
PRM-OM3-LL 1G/10G/25G/50G OM3 850 nm LC LC 50:50, 60:40 or 70:30 1
DATASHEET
quick user quide

Fiber Multimode OM4 LC - Modular Network TAP

OM4 LC TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 1G, 10G, 25G, 50G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm OM3, OM4
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PACKETRAVEN TAP MODELS MULTIMODE OM4
All TAPs for fiber type OM5 are also OM4 compatible! All TAPs for fiber type OM4 are also OM3 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
PRM-OM4-LL 1G/10G/25G/50G OM4 850 nm LC LC 50:50, 60:40 or 70:30 1
DATASHEET
quick user quide

Fiber Multimode OM5 LC - Modular Network TAP

OM5 LC TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 1G, 10G, 25G, 50G, 100G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Bi-directional (BiDi) models available
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm – 950 nm OM5
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PACKETRAVEN TAP MODELS MULTIMODE OM5
All TAPs for fiber type OM5 are also OM4 compatible! All TAPs for fiber type OM4 are also OM3 compatible!
SKU Network Fiber Type Wave- length Interface NET. / MON. Split Ratio Slots needed
PRM-OM5-LL 1G/10G/25G/ 50G/100G OM5 850 nm – 950 nm LC LC 50:50, 60:40 or 70:30 1
DATASHEET
quick user quide

Fiber Multimode OM4 MTP® - Modular Network TAP

OM4 MTP TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 40G, 50G, 100G, 200G, and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm OM3, OM4
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PACKETRAVEN TAP MODELS
MULTIMODE MTP OM4
All TAPs for fiber type OM5 are also OM4 compatible!
All TAPs for fiber type OM4 are also OM3 compatible!
SKUNetworkFiber TypeWave-
length		Interface
NET. / MON.		Split RatioSlots
needed
PRM-OM4-MM40G/100G/
200G/400G		OM4850 nmMTP®MTP®50:50,
60:40 or
70:30		2
 
DATASHEET
quick user quide

Fiber Multimode OM5 MTP® - Modular Network TAP

OM5 MTP TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 40G, 50G, 100G, 200G, and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm – 950 nm OM5
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PacketRaven TAP MODELS MULTIMODE
All TAPs for fiber type OM5 are also OM4 compatible! All TAPs for fiber type OM4 are also OM3 compatible!
Item No. Network Fiber Type Wave- length Interface NET. / MON. Split Ratio Slots needed
PRM-OM3-LL 1G/10G/25G/50G OM3 850 nm LC LC 50:50, 60:40, 70:30 1
PRM-OM4-LL 1G/10G/25G/50G OM4 850 nm LC LC 50:50, 60:40, 70:30 1
PRM-OM5-LL 1G/10G/25G/50G/100G OM5 850 nm – 950 nm LC LC 50:50, 60:40, 70:30 1
PRM-OM4-MM 40G/100G/200G/400G OM4 850 nm MTP® MTP® 50:50, 60:40, 70:30 2
PRM-OM5-MM 40G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® 50:50, 60:40, 70:30 2
DATASHEET
quick user quide

Fiber Multimode OM5 LC BiDI - Modular Network TAP

BIDI TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

Integrating support for tapping connections that utilize Bi-Directional (BiDi) technology based on Wavelength Division Multiplexing (WDM), some of our TAPs also accommodate both Singlemode and Multimode setups.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 40G and 100G
  • Bi-directional (BiDi) model – WDM (Wavelength Division Multiplexing) based
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50, 60:40, 70:30, 80:20 and 90:10 are supported
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm – 950 nm OM5
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
PACKETRAVEN TAP MODELS
BIDI MULTIMODE
All TAPs for fiber type OM5 are also OM4 and OM3 compatible!
SKUNetworkFiber TypeWavelengthInterface
NET. / MON.		Split RatioSlots
needed
PRM-OM5-BD-LL-50/60/7040G/100GOM5830 nm – 950 nmLCLC50:50/
60:40/
70:30		2
DATASHEET
quick user quide

Fiber Secure Modular Network TAP + Data Diode

SECURE TAP

Fiber TAPs are passive mirroring devices for secure and reliable tapping of network data in optical networks. These TAPs are looped into the fiber optic line to be monitored and route all data traffic without interruption.

Our optical TAPs do not require power, are purely passive components and therefore cannot be detected in the network without expensive measurement equipment. Hackers and other attackers thus have no chance, and since the integrity of the outgoing data remains unaltered due to this tapping method, Network TAPs are increasingly used in the areas of network forensics, security and monitoring.

But how does it work? Technically, optical TAPs split the light as it arrives and divide it into two fibers. In this case, a large part of the splitted signal remains on the actual network link and the rest is output to a monitoring port for external recording. Highly sensitive prisms are used to couple out the light wave.

Since optical Fiber TAPs are protocol-independent, these devices can be installed in a variety of network media. Thus, these TAPs are available for multimode and also singlemode network types and wavelength as well as network speed do not matter. The data is routed out transparently and loss-free without interfering with the active line.

Due to this splitting technique using a prism, attenuations naturally occur which must be taken into account when selecting the TAP. Fiber TAPs are available in 5 different variations and differ in their split ratio. Available are devices with the “split ratio” 50:50, 60:40, 70:30, 80:20, 90:10. A typical attenuation value of a 70:30 Fiber TAP is about 2dB on the network side and 6dB on the monitoring ports.

PacketRaven Modular Fiber TAPs are designed for data centers and allow you to equip up to 30 network segments with TAPs using our innovative, modular 1U chassis. They support network speeds from 100Mbps up to 400Gbps.

Without risk you get permanent network access and provide your monitoring and security tools with 100% reliable network data without introducing a single point of failure.

This makes our Secure TAPs especially suitable for business-critical applications and high-security areas and CRITIS infrastructures with high requirements for securing sensitive data.
They are 100% compatible with our modular standard TAPs without Data Diode Function and can be installed together in the same chassis. On top of that, they are protocol-agnostic and compatible with all monitoring systems from leading suppliers.

For further technical details, please refer to the data sheet or contact us. We will be happy to assist you in selecting the right TAP.

In addition to our Modular PacketRaven Network TAPs, we also offer Portable Network TAPs. These are, as the name suggests, portable, but can also be installed in one of our 1U rackmount frames.

  • Supported network speeds: 100M, 1G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G
  • Extra secure models with data diode functionality
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible in the network, no IP address, no MAC address, cannot be hacked
  • No power source necessary, 100% passive
  • Guaranteed no packet loss
  • Plug & play, simple installation without configuration
  • Scalable and modular, supports installation of all TAP models regardless of media type, speed and connector type
  • Split ratios of 50:50 and 70:30 are supported. If other Split Ratio needed pls. contact us
  • Color coded connectors for quick determination of the fitting fibre type
  • Does not cause additional latency
  • Designed, assembled, certified and tested in Germany
SUPPORTED MEDIA TYPE
Multimode 850 nm / 1300 nm OM1, OM2
Multimode 850 nm OM3, OM4
Multimode 850 nm – 950 nm OM5
Singlemode 1310 nm / 1550 nm OS1, OS2
 
SPECIFICATIONS
Height x Width x Depth (Chassis) 4.80 cm x 19.40 cm x 42.50 cm
Operating Temperature -40°C – +85°C
Relative Operating Humidity 5% – 95%
Reliability GR-1221-CORE
 
MAXIMUM INSERTION LOSS (dB)
Split Ratio (more on request) 50:50 70:30
Multimode OM3, OM4, OM5 3.8 dB / 4.8 dB 2.2 dB / 7.1 dB
Singlemode OS1, OS2 3.4 dB / 4.4 dB 1.7 dB / 6.8 dB
PACKETRAVEN SECURE TAP MODELS MULTIMODE
All TAPs for fiber type OM5 are also OM4 compatible! All TAPs for fiber type OM4 are also OM3 compatible!
SKU Network Fiber Type Wavelength Interface NET. / MON. Split Ratio Slots needed
PRM-OM3-LL-S 1G/10G/25G/50G OM3 850 nm LC LC 50:50 or 70:30 1
PRM-OM4-LL-S 1G/10G/25G/50G OM4 850 nm LC LC 50:50 or 70:30 1
PRM-OM5-LL-S 1G/10G/25G/50G OM5 850 nm – 950 nm LC LC 50:50 or 70:30 1
PACKETRAVEN SECURE TAP MODELS SINGLEMODE
All TAPs for fiber type OS2 are also OS1 compatible!
SKUNetworkFiber TypeWavelengthInterface
NET. / MON.		Split RatioSlots
needed
PRM-OS2-LL-1310S100M/1G/10G/25G/40G/
50G/100G/200G/400G		OS21310 nmLCLC50:50
70:30		1
PRM-OS2-LL-1550S100M/1G/10G/25G/40G
/50G/100G/200G/400G		OS21550 nmLCLC50:50
70:30		1
DATASHEET
quick user quide

Deployment

Modular Network TAP

SERVICE & SUPPORT

Unparalleled Multi-Level Service & Support for Peace of Mind

All NEOXPacketRaven Modular TAPs come with NEOX SILVER Support and can be upgraded to GOLD Support for advanced replacement in case of a hardware failure.

check support

FEATURED CONTENT

Creating Solutions for Your Success

infographic network-tap

Infographic

Why You Need a Network Tap

White Paper

White Paper

Network Tap vs SPAN/Mirror Port

Packet Capture Appliance

Product Brochure

A Complete Guide to Products

STAY IN TOUCH

Follow Our Social Media and Subscribe to Our Newsletter

Linkedin X-twitter Facebook Instagram Youtube

You have successfully subscribed