PacketRaven Network TAP

Standard, Hardened, Secure Portable TAP & Network Visibility

Request demo
Portable Network TAP
Up to 400Gbps
Full Network Transparency
No Impairment of Network Traffic
100% Network Data
Flexible to Use
Plug-n-Play
Failure Protection on Power Loss
PoE+ Power over Ethernet
Redundant Power Supplies
Fast and Precise
Data Diode Function
Hardened & Secure
Made in Germany
Various Mounting Options
No Network Access via Monitoring Port
(Optional) Fix Preconfigured
Secured and Encrypted Firmware
Security Seal against Unnoticed Opening
Safety Screws against Unwanted Opening
Supports Jumbo Frames
Various Split Ratios
Invisible to Attackers

Portable & Lossless 1-400G Network Wire-Data & Network Intelligence

Gain Complete Traffic Access through Versatile Distributed Network TAP

Undetectable | Secure Models | Hardened Models

Portable Network TAP

Accuracy

Capture 100% of network traffic at line rate, including FCS/CRC errored packets often missed by SPAN ports. PacketRaven ensures complete, high-fidelity data for accurate monitoring, troubleshooting, and security analysis in copper and fiber network environments.

Learn more
Portable Network TAP

Security

Operate with full isolation and zero attack surface through an invisible, hardware-based design with no IP or MAC address. PacketRaven provides safe, reaction-free monitoring with galvanic isolation and data diode functionality, ensuring no risk to production networks.

Learn more
Portable Network TAP

Flexibility

Adapt to diverse deployment needs with support for 10M, 100M, and 1G speeds, PoE passthrough, and multiple operation modes including breakout, aggregation, and regeneration. With plug-and-play setup, DIP switch configuration, and portable mounting options, PacketRaven delivers simple and versatile deployment anywhere.

Learn more

PacketRaven Portable 1G Copper RJ45 TAP

The PacketRaven Portable Copper (Network) to Copper (Monitoring) and TAP Copper (Network) to SFP (Monitoring) a is a high-performance, FPGA-based Network TAP designed for safe, lossless monitoring of 10M, 100M, and 1G RJ45 Ethernet links. Built for maximum reliability, it mirrors 100% of network traffic—including FCS/CRC errored packets that SPAN ports typically drop—without introducing latency or risking packet loss. The device operates completely invisibly on the network with no IP or MAC address, making it immune to hacking and ensuring compliance with the highest security requirements, including support for secure boot, encrypted firmware, and an optional high-security version certified under IEC 62443 standards for critical infrastructure. Its reverse-path isolation ensures full Data Diode functionality, preventing any injection of data into the network.

Engineered for both portable and rugged field use, the PacketRaven supports up to 16K jumbo frames and offers a simple plug-and-play setup with DIP-switch configuration. It features multiple operating modes including breakout, aggregation, and regeneration, allowing versatile deployment across different use cases. The unit is powered via redundant AC/DC power supplies with failover support and also offers PoE/PoE+ passthrough capabilities. Its design ensures operation even during power outages, thanks to a failsafe mode, and its galvanic isolation guarantees 100% reaction-free data capture. PacketRaven delivers rock-solid reliability and operational excellence, making it an ideal choice for network diagnostics, security forensics, and performance monitoring in both enterprise and critical infrastructure environments. 

Modular Network TAP

Network TAP

Modular Network TAP

Network TAP

  • Delivers reliable, lossless network visibility for 1G copper environments with full traffic capture
  • Provides secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Captures 100% of traffic, including errored packets often missed by SPAN ports, ensuring accurate analysis
  • Ensures uninterrupted operations with failsafe mode and no impact on live network performance
  • Offers flexible deployment with portable design, multiple mounting options, and simple plug-and-play setup
  • Supports modern network needs with PoE passthrough and compatibility across 10M, 100M, and 1G speeds
  • Built on a robust FPGA-based architecture for high reliability and consistent performance
  • Enables safe and isolated monitoring with galvanic isolation and data diode functionality
request quote
  • FPGA-based architecture ensuring stable, deterministic performance and reliability
  • Support for 10M, 100M, and 1G Ethernet (10Base-T, 100Base-TX, 1000Base-T)
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully invisible on the network with no IP or MAC address and no attack surface
  • No packet loss with full line-rate traffic capture
  • Redundant power options including dual 5V AC/DC supplies and 12–48V DC input
  • PoE (802.3af) passthrough support for powered devices
  • Failsafe mode to maintain network link continuity during power failure
  • Multiple operation modes including breakout, aggregation, and regeneration
  • Simple configuration via DIP switches
  • Galvanic isolation ensuring 100% reaction-free operation and data diode functionality
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software or configuration required
  • Flexible mounting options for portable and fixed installations
Product brief
SKU Standard(s) Network Interface NET. / MON. Operating Mode(s)
PRP-SCC-1GA 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation, Breakout, Regeneration
  PRP-SCS-1GA 10/100/1000Base-T 10M/100M/1000M RJ45 SFP Aggregation, Breakout, Regeneration
  PRP-SCC-1GB 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Breakout
  PRP-SCS-1GB 10/100/1000Base-T 10M/100M/1000M RJ45 SFP Breakout
Data Sheet
SKU Standard(s) Network Interface NET. / MON. Operating Mode(s)
  PRP-SCC-1GA-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation, Breakout, Regeneration
  PRP-SCC-1GAO-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation
  PRP-SCC-1GBO-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Breakout

PacketRaven Portable 1G Copper M12 TAP

The PacketRaven Copper M12 TAP is a rugged, FPGA-based network TAP specifically designed for harsh industrial environments and applications requiring M12 connectivity. Supporting 10M, 100M, and 1G Ethernet speeds, it delivers 100% real-time traffic mirroring, including FCS/CRC errored packets that are often missed by SPAN ports. With a completely passive, IP-less and MAC-less design, the M12 TAP is network invisible and immune to cyber threats, making it ideal for critical infrastructure and transportation systems. It also features reverse-path isolation, enabling true data diode functionality, ensuring that monitored traffic cannot be altered or injected back into the network.

Built for durability, the PacketRaven M12 TAP offers robust protection against vibration, dust, and moisture, and complies with IEC 62443 requirements for industrial cybersecurity. It supports up to 16K jumbo frames, and operates in breakout, aggregation, and regeneration modes—providing flexible deployment options. Configuration is easy via DIP switches, and the device operates reliably under all conditions thanks to redundant AC/DC power inputs and PoE/PoE+ passthrough support. In the event of power loss, a failsafe mode maintains network connectivity without interruption.

Featuring galvanic isolation, it guarantees reaction-free operation for accurate traffic capture. Assembled and tested in Germany, the PacketRaven Copper M12 TAP combines industrial-grade resilience with high-security design, making it the perfect solution for transportation systems, factory automation, and remote monitoring environments where reliability and protection are paramount. 

  • Delivers reliable, lossless network visibility for industrial and rugged environments using M12 connectivity
  • Built on a safe, rock-solid FPGA-based architecture for deterministic and high-reliability performance
  • Provides secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports, ensuring accurate analysis
  • Designed for harsh and mission-critical environments with industrial-grade M12 interfaces and optional hardened variants
  • Ensures uninterrupted operations with failsafe design and no impact on live network traffic
  • Supports flexible deployment with portable form factor, DIN rail and rack-mount options
  • Enables safe and isolated monitoring with galvanic isolation and data diode functionality
  • Built on a robust FPGA-based architecture for deterministic, high-reliability performance
request quote
  • FPGA-based design ensuring stable, deterministic, and high-performance packet mirroring
  • Support for 10M, 100M, and 1G Ethernet (10Base-T, 100Base-TX, 1000Base-T)
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully invisible operation with no IP or MAC address and no exposure to network threats
  • Guaranteed zero packet loss with no added latency
  • Redundant power options including dual 5V AC/DC supplies and 12–48V DC input
  • PoE (802.3af) passthrough support for powered devices
  • Failsafe mode to maintain network link continuity during power failure
  • Multiple operation modes including breakout, aggregation, and regeneration
  • Simple configuration via DIP switches
  • Galvanic isolation ensuring 100% reaction-free operation and data diode functionality
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software or configuration required
  • Flexible mounting options for portable, DIN rail, or rack installations
Product brief
SKU Standard(s) Network Interface NET. / MON. Operating Mode(s)
  PRP-M12-1GA 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Aggregation, Breakout, Regeneration
  PRP-M12-1GB 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Breakout
Data Sheet
SKU Standard(s) Network Interface NET. / MON. Operating Mode(s)
  PRP-M12-1GA-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Aggregation, Breakout, Regeneration
  PRP-M12-1GAO-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Aggregation
  PRP-M12-1GBO-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Breakout
 

PacketRaven Portable 1G Fiber SFP TAP

The PacketRaven Fiber SFP TAP is a rugged, high-security fiber tapping solution designed for 100M and 1G SFP-based network environments. Featuring a safe, FPGA-based architecture, it ensures ultra-low latency operation with zero packet loss, even under full load. Unlike SPAN ports, it delivers 100% traffic visibility, including FCS/CRC errored packets, which are critical for accurate monitoring and forensics. Compatible with fiber standards such as 100Base-FX, 1000Base-LX, 1000Base-SX, 1000Base-ZX, and 1000Base-T, it provides reliable performance across diverse fiber network scenarios.

Its network-invisible design—with no IP or MAC address—ensures it cannot be hacked, making it ideal for secure, passive monitoring in sensitive infrastructures. The device incorporates NEOX’s Data Diode functionality, providing 100% reverse-path isolation, which guarantees unidirectional data flow and supports compliance with IEC 62443 for critical infrastructure protection.

The TAP offers breakout, aggregation, and regeneration modes, and supports up to 16K Jumbo Frames, making it suitable for modern, high-volume traffic environments. Power redundancy is built-in with dual AC/DC power supplies or 12–48V DC input and failsafe mode for uninterrupted operation during outages. Configuration is made simple through DIP switches, while secure firmware encryption and secure boot provide strong protection against tampering.
This plug-and-play solution includes multiple mounting options, including rack-mount compatibility, and is assembled, tested, and certified for the highest quality assurance. With true passive monitoring, unmatched reliability, and hardened security, the PacketRaven Fiber SFP TAP is the optimal choice for organizations requiring secure, lossless, and transparent fiber network access at 100M and 1G speeds.

  • Delivers reliable, lossless network visibility for fiber environments with guaranteed zero packet loss
  • Built on a safe, rock-solid FPGA-based architecture for deterministic and high-performance packet capture
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports
  • Provides secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Ensures uninterrupted operations with failsafe mode and no impact on production traffic
  • Supports flexible fiber deployments across multiple SFP transceiver types and network standards
  • Enables safe, reaction-free monitoring through galvanic isolation and data diode functionality
  • Simplifies deployment with plug-and-play installation and easy DIP switch configuration
request quote
  • FPGA-based design ensuring stable, deterministic, and high-reliability packet capture
  • Support for 100M and 1G Ethernet including 100Base-FX, 100Base-TX, 1000Base-LX, 1000Base-SX, 1000Base-ZX, and 1000Base-T
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully invisible operation with no IP or MAC address and no exposure to network threats
  • Guaranteed zero packet loss with no additional latency
  • Redundant power options including dual 5V AC/DC supplies and 12–48V DC input
  • Failsafe mode to maintain network link continuity during power failure
  • Multiple operation modes including breakout, aggregation, and regeneration
  • Simple configuration via DIP switches
  • Galvanic isolation ensuring 100% reaction-free operation and data diode functionality
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software or configuration required
  • Flexible mounting options for portable, DIN rail, or rack installations
Product brief
SKU Standard(s) Network Interface NET. / MON. Operating Mode(s)
PRP-SSS-1GA 100Base-FX, 100Base-TX,1000Base-LX, 1000Base-SX,1000Base-ZX, 1000Base-T 100M/1G SFP SFP Aggregation, Breakout, Regeneration
Data Sheet

PacketRaven Portable 400G Fiber SM TAP

The PacketRaven Portable 1–400Gbps Single-Mode Fiber TAP is a highly versatile, fully passive optical tapping solution built to support next-generation high-speed networks from 1G to 400G. Featuring a safe FPGA-based design and engineered for ultra-low latency, it ensures guaranteed zero packet loss, even at maximum throughput. Unlike SPAN ports, this TAP captures 100% of traffic, including FCS/CRC errored packets, making it ideal for forensic analysis and precise network visibility. Its network-invisible architecture—with no IP or MAC address—ensures complete stealth and immunity to cyberattacks, providing a secure foundation for sensitive environments such as finance, defense, or critical infrastructure.

Designed with NEOX’s Data Diode function, it offers 100% reverse-path isolation and supports multiple operation modes including breakout, aggregation, and regeneration—enabling maximum flexibility in deployment. Its support for up to 16K Jumbo Frames and variable optical split ratios (50:50 to 90:10) ensures it meets diverse use cases, from real-time monitoring to long-term packet capture. As a purely passive device, it requires no external power, ensuring uninterrupted traffic forwarding even in power loss scenarios. The TAP is Plug-n-Play and available with various mounting options, including portable field kits and rack-mount configurations, making it highly adaptable for lab, data center, and remote field applications.

Built for reliability, the TAP is also available in hardened models for outdoor and harsh environments. A high-security version compliant with IEC 62443 is optionally available, featuring secure boot and encrypted firmware for added protection. With performance up to 400Gbps, the PacketRaven Portable Fiber TAP delivers unmatched reliability, transparency, and safety for modern high-speed optical networks. 

  • Delivers complete, lossless network visibility for high-speed fiber networks up to 400G
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports
  • Provides fully secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Operates as a 100% passive TAP with no power requirement and zero impact on live network traffic
  • Ensures uninterrupted performance with no added latency or single point of failure
  • Supports flexible deployment across modern high-speed networks with multiple split ratios
  • Simplifies installation with plug-and-play design and no configuration required
  • Built for scalable, high-density environments with flexible mounting options
request quote
  • Support for network speeds from 1G to 400G including 1G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G
  • Compatible with 1000Base-LX/ZX and high-speed single-mode fiber environments
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully passive operation with no power supply required and no impact on production traffic
  • No packet loss and no additional latency introduced into the network
  • Optical split ratios including 50:50, 60:40, 70:30, 80:20, and 90:10 for deployment flexibility
  • Fully invisible device with no IP or MAC address and no attack surface
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no configuration required
  • Flexible mounting options for portable and fixed installations
Product brief
SKU Network Stan- dards Fiber type Wavelength Split Ratio Interface NET. / MON. TAP Version
PRP-OS2-SLL 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1260 – 1650 nm 50:50, 60:40 or 70:30 LC LC Single-TAP
PRP-OS2-DLL 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1260 – 1650 nm 50:50, 60:40 or 70:30 LC LC Dual-TAP
Data Sheet
SKU Network Stan- dards Fiber type Wavelength Split Ratio Interface NET. / MON. TAP Version
PRP-OS2-SLL-1310S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1310 nm 50:50, 60:40 or 70:30 LC LC Single TAP
PRP-OS2-SLL-1550S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1550 nm 50:50, 60:40 or 70:30 LC LC Single TAP
PRP-OS2-DLL-1310S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1310 nm 50:50, 60:40 or 70:30 LC LC Dual TAP
PRP-OS2-DLL-1550S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1550 nm 50:50, 60:40 or 70:30 LC LC Dual TAP
* Different Base types

PacketRaven Portable 1G Hybrid SM TAP

The PacketRaven Portable 1G Fiber Single-Mode and Copper Hybrid TAP is a compact, high-reliability solution designed for 1G network monitoring in single-mode environments, supporting 1000Base-LX and 1000Base-ZX standards. Built with a secure, FPGA-based architecture, it ensures ultra-low latency and guaranteed zero packet loss, even during high-throughput analysis. Unlike SPAN ports, this TAP mirrors 100% of network traffic, including FCS/CRC errored packets that SPANs typically discard, enabling full forensic visibility.

Completely invisible on the network—with no IP or MAC address—it eliminates cyberattack vectors and cannot be discovered or compromised. The TAP is 100% passive, introducing no additional latency or points of failure, and offers galvanic isolation through the NEOX Data Diode function, ensuring absolute reverse-path protection. It supports flexible deployment scenarios via breakout, aggregation, and regeneration modes, all configurable via simple DIP switches, making it truly Plug-n-Play. Power can be supplied through redundant AC/DC units (5V) or 12–48V DC input, adding resilience for mission-critical applications.

With support for up to 16K Jumbo Frames and customizable optical split ratios (50:50 to 90:10), the PacketRaven TAP adapts easily to specific monitoring needs. Available in hardened models for rugged outdoor environments, it’s also offered with a high-security version that meets IEC 62443 standards, featuring secure boot and encrypted firmware. Ideal for mobile deployments, field engineers, or secure infrastructures, the PacketRaven Portable 1G Hybrid SM TAP provides robust, stealthy, and precise access to network traffic—without risk, without compromise. Shop 

  • Delivers reliable, lossless network visibility for 1G single-mode fiber environments with guaranteed zero packet loss
  • Combines passive optical tapping with FPGA-based processing for flexible and high-performance traffic access
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports
  • Provides secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Ensures uninterrupted network operations with no added latency or impact on production traffic
  • Supports flexible deployment with multiple split ratios and advanced traffic handling modes
  • Enables safe, reaction-free monitoring through galvanic isolation and data diode functionality
  • Simplifies deployment with plug-and-play installation and easy DIP switch configuration
request quote
  • Secure, FPGA-based design ensuring stable, deterministic, and high-reliability packet capture
  • Support for 1G single-mode fiber including 1000Base-LX and 1000Base-ZX
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully invisible operation with no IP or MAC address and no exposure to network threats
  • Guaranteed zero packet loss with no additional latency
  • Hybrid architecture combining passive optical splitting with powered operation for advanced features
  • Redundant power options including dual 5V AC/DC supplies and 12–48V DC input
  • Optical split ratios including 50:50, 60:40, 70:30, 80:20, and 90:10 for deployment flexibility
  • Multiple operation modes including breakout, aggregation, and regeneration
  • Galvanic isolation ensuring 100% reaction-free operation and data diode functionality
  • Simple configuration via DIP switches for operating mode selection
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software configuration required
  • Flexible mounting options for portable and fixed installations
Product brief
SKU Standard Network Fiber Type Wavelength Split Ratio Interface NET. / MON.
PRP-OM3FX-SLC 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM3FX-SLS 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4FX-SLC 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4FX-SLS 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4-SLC 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4-SLS 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM5-SLC 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM5-SLS 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode SFP
Data Sheet
SKU Standard Network Fiber Type Wave- length Split Ratio Interface NET. / MON. Operating Mode(s)
PRP-OM*FX-SLC-100MA-S 100Base-FX 100M OM3/4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM*FX-SLC-100MAO-S 100Base-FX 100M OM3/4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM*FX-SLC-100MBO-S 100Base-FX 100M OM3/4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM*-SLC-1GA-S 1000Base-SX 1G OM4/5 850 nm-950 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM*-SLC-1GAO-S 1000Base-SX 1G OM4/5 850 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM*-SLC-1GBO-S 1000Base-SX 1G OM4/5 850 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
* OM3/OM4/OM5 Options

PacketRaven Portable 400G MM Fiber TAP

The PacketRaven Portable 400G Multi-Mode Fiber TAP is engineered for next-generation high-speed network environments, supporting a wide range of network speeds including 1G, 2.5G, 5G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G. Built on a safe and rock-solid FPGA-based design, it ensures zero packet loss, ultra-low latency, and 100% traffic visibility, including FCS/CRC errored packets that are often missed by SPAN ports. With its passive operation, the TAP introduces no additional latency and does not affect the active network connection, making it the ideal tool for performance monitoring and forensic capture in high-bandwidth data center or enterprise networks.

The device is completely network-invisible, featuring no IP or MAC address, ensuring it cannot be hacked or discovered, while the NEOX Data Diode function provides 100% reverse-path isolation, protecting sensitive network segments. It supports multiple operation modes such as breakout, aggregation, and regeneration, all configurable via simple DIP switches, enabling a truly Plug-n-Play experience. The modular split ratio design (e.g., 50:50 to 90:10) offers flexibility for various deployment scenarios, and the device supports up to 16K Jumbo Frames, essential for modern applications and high-volume data transfers.

Power options include redundant AC/DC supplies, with failover support for uninterrupted operation in critical environments. Ruggedized models are available for remote or outdoor deployments, while a high-security version compliant with IEC 62443 standards includes secure boot and encrypted firmware for use in critical infrastructure. Whether used in lab environments, data centers, or field deployments, the PacketRaven Portable 400G MM Fiber TAP delivers reliable, high-performance network access with unmatched security, scalability, and ease of use.

  • Delivers complete, lossless network visibility for high-speed multi-mode fiber networks up to 400G
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports
  • Provides fully secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Operates as a 100% passive TAP with no power requirement and zero impact on live network traffic
  • Ensures uninterrupted performance with no added latency or packet loss
  • Supports flexible deployment across modern data center environments with multiple split ratios
  • Simplifies installation with plug-and-play deployment and straightforward configuration options
  • Enables scalable visibility across a wide range of network speeds and environments
request quote
  • Support for network speeds from 1G to 400G including 1G, 2.5G, 5G, 10G, 25G, 40G, 50G, 100G, 200G, and 400G
  • Designed for high-speed multi-mode fiber environments in modern data centers
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully passive operation with no power supply required and no impact on production traffic
  • No packet loss and no additional latency introduced into the network
  • Optical split ratios including 50:50, 60:40, 70:30, 80:20, and 90:10 for deployment flexibility
  • Fully invisible device with no IP or MAC address and no attack surface
  • Simple configuration via DIP switches
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software configuration required
  • Flexible mounting options for portable and fixed installations
Product brief
SKU Network Fiber type Wavelength Interface NET. / MON. TAP Version
PRP-OM4-SLL 100M/1G/ 10G/25G OM4 850 / 1310 nm LC LC Single-TAP
PRP-OM4-DLL 100M/1G/ 10G/25G OM4 850 / 1310 nm LC LC Dual-TAP
PRP-OM4-SMM 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm MTP® MTP® Single-TAP
PRP-OM4-DMM 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm MTP® MTP® Dual-TAP
PRP-OM5-SLL 100M/1G/10G/25G/40G/50G/100G OM5 850 nm – 950 nm LC LC Single-TAP
PRP-OM5-DLL 100M/1G/10G/25G/40G/50G/100G OM5 850 – 950 nm LC LC Dual-TAP
PRP-OM5-SMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® Single-TAP
PRP-OM5-DMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® Dual-TAP
Split Ratio : 50:50, 60:40 or 70:30
Data Sheet
SKU Network Fiber type Wavelength Interface NET. / MON. TAP Version
PRP-OM5-SLL 100M/1G/10G/25G/40G/50G/100G OM5 850 nm – 950 nm LC LC Single-TAP
PRP-OM5-DLL 100M/1G/10G/25G/40G/50G/100G OM5 850 – 950 nm LC LC Dual-TAP
PRP-OM5-SMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® Single-TAP
PRP-OM5-DMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm MTP® MTP® Dual-TAP
PRP-OM4-SLL-S 100M/1G/ 10G/25G OM4 850 nm LC LC Single TAP
PRP-OM4-DLL-S 100M/1G/ 10G/25G OM4 850 nm LC LC Dual TAP
PRP-OM4-SMM-S 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm MTP® MTP® Single TAP
PRP-OM4-DMM-S 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm MTP® MTP® Dual TAP
Split Ratio : 50:50, 60:40 or 70:30

PacketRaven Portable 1G Hybrid MM TAP

The PacketRaven Portable 1G Hybrid Multimode Fiber TAP is a compact, high-reliability solution designed for 100M and 1G network monitoring in Multimode environments, 1000Base-SX standards. Built with a secure, FPGA-based architecture, it guarantees zero packet loss, ultra-low latency, and 100% traffic mirroring, including FCS/CRC errored packets that are often missed by SPAN ports. With breakout, aggregation, and regeneration modes, the TAP can be flexibly deployed to suit different monitoring requirements, while Plug-n-Play configuration via DIP switches enables quick and easy setup.

Completely invisible to the network, the TAP has no IP or MAC address, making it untraceable and immune to hacking. The integrated NEOX Data Diode function ensures full reverse-path isolation for maximum security. Its 100% passive design introduces no additional latency or disruption to active network traffic and supports split ratios from 50:50 to 90:10. The device also supports up to 16K Jumbo Frames, making it ideal for modern high-volume traffic environments.

Power redundancy is provided through dual 5V AC/DC inputs and a 12–48V DC range, ensuring continuous operation in critical scenarios. Ruggedized models are available for harsh or remote environments, and optional high-security versions comply with IEC 62443 standards, featuring secure boot and encrypted firmware. With multiple mounting options and a compact footprint, the PacketRaven Portable 1G Hybrid Multimode Fiber TAP delivers secure, reliable, and flexible monitoring for enterprise, industrial, and mission-critical networks. PacketRaven Portable Fiber MM

  • Delivers reliable, lossless network visibility for 100M and 1G multi-mode fiber environments with guaranteed zero packet loss
  • Combines passive optical tapping with a secure, rock-solid FPGA-based design for flexible and high-performance traffic access
  • Captures 100% of traffic, including FCS/CRC errored packets often missed by SPAN ports
  • Provides secure, invisible monitoring with no IP or MAC address and zero attack surface
  • Ensures uninterrupted network operations with no added latency or impact on production traffic
  • Supports flexible deployment with configurable split ratios and advanced traffic handling modes
  • Enables safe, reaction-free monitoring through galvanic isolation and data diode functionality
  • Simplifies deployment with plug-and-play installation and easy DIP switch configuration
request quote
  • Secure, FPGA-based design ensuring stable, deterministic, and high-reliability packet capture
  • Support for 100M and 1G multi-mode fiber including 100Base-FX and 1000Base-SX
  • Alternative to SPAN ports with guaranteed 100% traffic mirroring, including FCS/CRC errored packets
  • Fully invisible operation with no IP or MAC address and no exposure to network threats
  • Guaranteed zero packet loss with no additional latency
  • Hybrid architecture combining passive optical splitting with powered operation for advanced features
  • Redundant power options including dual 5V AC/DC supplies and 12–48V DC input
  • Optical split ratios including 50:50, 60:40, 70:30, 80:20, and 90:10
  • 100% passive inline behavior with no impact on active network connections
  • Multiple operation modes including breakout, aggregation, and regeneration
  • Galvanic isolation ensuring 100% reaction-free operation and data diode functionality
  • Simple configuration via DIP switches for operating mode selection
  • Support for Jumbo Frames up to 16K
  • Plug-and-play deployment with no software configuration required
  • Flexible mounting options for portable and fixed installations
Product brief
SKU Standard Network Fiber Type Wavelength Interface NET. / MON.
PRP-OM3FX-SLC 100Base-FX 100M OM3 1310 nm LC Multimode RJ45
PRP-OM3FX-SLS 100Base-FX 100M OM3 1310 nm LC Multimode SFP
PRP-OM4FX-SLC 100Base-FX 100M OM4 1310 nm LC Multimode RJ45
PRP-OM4FX-SLS 100Base-FX 100M OM4 1310 nm LC Multimode SFP
PRP-OM4-SLC 1000Base-SX 1G OM4 850 nm LC Multimode RJ45
PRP-OM4-SLS 1000Base-SX 1G OM4 850 nm LC Multimode SFP
PRP-OM5-SLC 1000Base-SX 1G OM5 850 nm – 950 nm LC Multimode RJ45
PRP-OM5-SLS 1000Base-SX 1G OM5 850 nm – 950 nm LC Multimode SFP
Split Ratio : 50:50, 60:40 or 70:30
Data Sheet
SKU Standard Network Fiber Type Wavelength Interface NET. / MON. Operating Mode(s)
PRP-OM3FX-SLC-100MA-S 100Base-FX 100M OM3 1310 nm LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM3FX-SLC-100MAO-S 100Base-FX 100M OM3 1310 nm LC RJ45 Aggregation
PRP-OM3FX-SLC-100MBO-S 100Base-FX 100M OM3 1310 nm LC RJ45 Breakout
PRP-OM4FX-SLC-100MA-S 100Base-FX 100M OM4 1310 nm LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4FX-SLC-100MAO-S 100Base-FX 100M OM4 1310 nm LC RJ45 Aggregation
PRP-OM4FX-SLC-100MBO-S 100Base-FX 100M OM4 1310 nm LC RJ45 Breakout
PRP-OM4-SLC-1GA-S 1000Base-SX 1G OM4 850 nm LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4-SLC-1GAO-S 1000Base-SX 1G OM4 850 nm LC RJ45 Aggregation
PRP-OM4-SLC-1GBO-S 1000Base-SX 1G OM4 850 nm LC RJ45 Breakout
PRP-OM5-SLC-1GA-S 1000Base-SX 1G OM5 850 nm – 950 nm LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM5-SLC-1GAO-S 1000Base-SX 1G OM5 850 nm – 950 nm LC RJ45 Aggregation
PRP-OM5-SLC-1GBO-S 1000Base-SX 1G OM5 850 nm – 950 nm LC RJ45 Breakout
Split Ratio : 50:50, 60:40 or 70:30

PacketRaven Portable TAP Accessories

The PacketRaven Portable Network TAPs are designed with maximum versatility and mobility in mind, making them ideal for both temporary and permanent indoor and outdoor deployments. Out of the box, these units are fully operational for mobile use and require no additional accessories. However, for structured environments such as data centers and industrial plants, the TAPs can be conveniently installed in a standard 19” server rack using our dedicated server rack mounting frame, which accommodates multiple PacketRaven Portable TAPs side by side.

To secure the TAPs within the mounting frame, the rackmount frame mounting kit is required. Both items are available as accessories and allow for stable, professional installation that is space-efficient and organized. As an alternative to rack installation, PacketRaven TAPs can also be mounted on TS35/7.5 DIN top-hat rails, commonly used in industrial and field environments. For this purpose, we offer a DIN rail mounting clip that allows easy and secure attachment. The clip is rotatable by 180°, providing flexibility to align the TAP’s ports according to specific installation requirements. This is particularly useful in space-constrained enclosures or when front-facing access is necessary.

Additionally, we provide custom Y-cables as part of the accessory lineup, enabling efficient and clean cable management in breakout or aggregation configurations. These cables are built to match the high-performance standards of PacketRaven TAPs, ensuring signal integrity and reliability in any deployment scenario. With all these mounting and connectivity options, PacketRaven Portable TAPs offer unmatched adaptability, enabling users to deploy them in mobile setups, secure rack environments, or rugged industrial systems without compromising performance or accessibility.

To install our portable TAPs in a server rack, you need our server rack mounting frame with item number PRP-1U3-V2, as well as a rackmount frame mounting kit (item number PRP-1U3-CLIP) for the TAP. The server rack mounting frame PRP-1U3-V2 provides space for up to 3 portable PacketRaven Network TAPs. Both components are available as accessories.
SKU Description
  PRP-1U3-V2 Server rack mounting frame for 3 portable TAPs
  PRP-1U3-BP-V2 Blank plate for mounting frame (see center in photo)
  PRP-1U3-CLIP TAP rackmount frame bracket for server rack mounting frame PRP-1U3-V2
  PRP-DIN-CLIP TAP DIN rail mounting clip
As a further alternative, we also offer a top-hat rail clip for our TAPs for mounting on a TS35/7.5 DIN top-hat rail. This clip can be rotated by 180° so that the connections of the TAP can be aligned according to the respective requirements. This DIN rail clip, available as an accessory, has the item number PRP-DIN-CLIP.
SKU Description
  PRP-PS-INT Power supply with with interchangeable EU, UK, and US plug heads (Two of these power supplies are already included with every portable active Network TAP)
PRP-PS-EU Power supply with EU plug (head)
PRP-PS-UK Power supply with UK plug (head)
PRP-PS-US Power supply unit with US plug (head)
PRP-PS-*-A Plug head *EU, *UK or *US
  PRP-PS-C14-25W Switching power supply with C14 socket on input side according to IEC60320, to be connected to PDU via C13-C14 cable
SKU Fiber Type Diameter Description Cable Lenght
  NX-LC-Y-PC-OS2-1M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OS2-2M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OS2-3M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OS2-5M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
  NX-LC-Y-PC-OM4-1M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OM4-2M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OM4-3M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OM4-5M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
  NX-LC-Y-PC-OM5-1M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OM5-2M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OM5-3M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OM5-5M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
* OS1 compatible

NEOXPacketRaven Network TAPs basically support all MSA-compliant SFP transceivers!

A selection of the SFP transceivers we have already tested can be found in our

SKU Link Connector Operating Temp. LLD1
  NX-SFP-TX-1G 1000Base-T RJ45 0°C to 70°C
  NX-SFP-SX-1G 1000Base-SX LC 0°C to 70°C
  NX-SFP-LX10-1G 1000Base-LX; 10 km LC 0°C to 70°C
  NX-SFP-LX20-1G 1000Base-LX; 20 km LC 0°C to 70°C
  NX-SFP-LX40-1G 1000Base-SX; 40 km LC 0°C to 70°C
  NX-SFP-ZX80-1G 1000Base-ZX; 80 km LC 0°C to 70°C
  NX-SFP-ZX120-1G 1000Base-ZX; 120 km LC 0°C to 70°C
  NX-SFP-ZX160-1G 1000Base-ZX; 160 km LC 0°C to 70°C
  NX-SFP-FX-100M 100Base-FX LC 0°C to 70°C

FEATURED RESOURCES

Network Visibility for Our Customers

infographic network-tap

Infographic

Why You Need a Network Tap

PacketRaven Modular Network TAP

Video

Why Not to Use SPAN for Network Monitoring

White Paper

White Paper

Network Tap vs SPAN/Mirror Port

Learn more
COPPER/RJ45 TAP MODELS – STANDARD
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard(s) Network Interface NET. / MON. OPERATING MODE(S)
  PRP-SCC-1GA 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation, Breakout, Regeneration
  PRP-SCS-1GA 10/100/1000Base-T 10M/100M/1000M RJ45 SFP Aggregation, Breakout, Regeneration
  PRP-SCC-1GB 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Breakout
  PRP-SCS-1GB 10/100/1000Base-T 10M/100M/1000M RJ45 SFP Breakout
COPPER/RJ45 TAP MODELS – HARDENED
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard(s) Network Interface NET. / MON. OPERATING MODE(S)
  PRP-SCC-1GA-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation, Breakout, Regeneration
  PRP-SCC-1GAO-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Aggregation
  PRP-SCC-1GBO-S 10/100/1000Base-T 10M/100M/1000M RJ45 RJ45 Breakout
  • Safe, rock-solid FPGA-based design
  • Supports 10M, 100M and 1G network speeds – 10Base-T, 100Base-TX, 1000Base-T, 10/100/1000 BaseT
  • An alternative to SPAN ports, however, is that it mirrors 100% of the traffic, including FCS/CRC errored packets that may otherwise be dropped by SPANs.
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • Power supply via redundant AC/DC power supply units (5V) and/or 12-48V DC voltage
  • Supports PoE 802.3af passthrough
  • Supports failsafe mode for resilience in the event of a power failure
  • Supports breakout, aggregation and regeneration mode
  • Simple configuration via DIP switches
  • 100% reaction-free through galvanic isolation (data diode function)
  • Supports up to 16k Jumbo Frames
  • Plug-n-Play
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE, EN 55032 KL. A/B, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 50121-4:2016*, EN 50129*
* Hardened TAPs  
shop online
Product brief
Data Sheet
quick user guide
COPPER/M12 TAP MODELS – HARDENED
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard(s) Network Interface NET. / MON. OPERATING MODE(S)
  PRP-M12-1GA-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Aggregation, Breakout, Regeneration
  PRP-M12-1GAO-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Aggregation
  PRP-M12-1GBO-S 10/100/1000Base-T 10M/100M/1000M M12 (X-coded) M12 (X-coded) Breakout
 
  • Safe, rock-solid FPGA-based design
  • Supports 10M, 100M and 1G network speeds – 10Base-T, 100Base-TX, 1000Base-T, 10/100/1000 BaseT
  • An alternative to SPAN ports, however, is that it mirrors 100% of the traffic, including FCS/CRC errored packets that may otherwise be dropped by SPANs.
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • Power supply via redundant AC/DC power supply units (5V) and/or 12-48V DC voltage
  • Supports PoE 802.3af passthrough
  • Supports failsafe mode for resilience in the event of a power failure
  • Supports breakout, aggregation and regeneration mode
  • Simple configuration via DIP switches
  • 100% reaction-free through galvanic isolation (data diode function)
  • Supports up to 16k Jumbo Frames
  • Plug-n-Play
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE, EN 55032 KL. A/B, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 50121-4:2016*, EN 50129*
* Hardened TAPs  
shop online
Product brief
Data Sheet
quick user guide
SFP TAP MODEL
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard(s) Network Interface NET. / MON. OPERATING MODE(S)
PRP-SSS-1GA 100Base-FX, 100Base-TX,1000Base-LX, 1000Base-SX,1000Base-ZX, 1000Base-T 100M/1G SFP SFP Aggregation, Breakout, Regeneration
  • Safe, rock-solid FPGA-based design
  • Supports 100M and 1G network speeds – 100Base-FX, 100Base-TX, 1000Base-LX, 1000Base-SX, 1000Base-ZX, 1000Base-T
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • Power supply via redundant AC/DC power supply units (5V) and/or 12-48V DC voltage
  • Supports failsafe mode for resilience in the event of a power failure
  • Supports breakout, aggregation and regeneration mode
  • Simple configuration via DIP switches
  • 100% reaction-free through galvanic isolation (data diode function)
  • Supports up to 16k Jumbo Frames
  • Plug-n-Play
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE
shop online
Product brief
Data Sheet
quick user guide
SINGLEMODE FIBER TAP MODELS – STANDARD
All TAPs for fiber type OS2 are also OS1 compatible!
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Network Stan- dards Fiber type Wave- length Split Ratio Interface NET. / MON. TAP Version
PRP-OS2-SLL 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1260 – 1650 nm 50:50, 60:40 or 70:30 LC LC Single-TAP
PRP-OS2-DLL 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1260 – 1650 nm 50:50, 60:40 or 70:30 LC LC Dual-TAP
SINGLEMODE FIBER TAP MODELS – SECURE
All TAPs for fiber type OS2 are also OS1 compatible!
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Network Stan- dards Fiber type Wave- length Split Ratio Interface NET. / MON. TAP Version
PRP-OS2-SLL-1310S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1310 nm 50:50, 60:40 or 70:30 LC LC Single TAP
PRP-OS2-SLL-1550S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1550 nm 50:50, 60:40 or 70:30 LC LC Single TAP
PRP-OS2-DLL-1310S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1310 nm 50:50, 60:40 or 70:30 LC LC Dual TAP
PRP-OS2-DLL-1550S 1G/10G/25G/ 40G/50G/100G/ 200G/400G * OS2 1550 nm 50:50, 60:40 or 70:30 LC LC Dual TAP
* Different Base types
  • 1000Base-LX/ZX – supported network speeds: 1G, 10G, 25G, 40G, 50G, 100G, 200G and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • 100% passive without affecting the active network connection, no additional latency
  • Available in different split ratios – e.g. 50:50, 60:40, 70:30, 80:20, 90:10
  • No power supply needed, 100% passive
  • Plug-n-Play
  • Supports up to 16k Jumbo Frames
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE
MAXIMUM INSERTION LOSS
Split Ratio (more on request) 50:50 60:40 70:30
Singlemode OS1, OS2 3.4 dB / 3.4 dB 2.5 dB / 4.5 dB 1.7 dB / 5.8 dB
 
shop online
Product brief
Data Sheet
quick user guide
HYBRID OM3 MULTIMODE FIBER TAP MODELS – STANDARD
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard Network Fiber Type Wave- length Split Ratio Interface NET. / MON.
PRP-OM3FX-SLC 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM3FX-SLS 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4FX-SLC 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4FX-SLS 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4-SLC 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4-SLS 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM5-SLC 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM5-SLS 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode SFP
HYBRID OM3 MULTIMODE FIBER TAP MODELS – HARDENED
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard Network Fiber Type Wave- length Split Ratio Interface NET. / MON. OPERATING MODE(S)
PRP-OM3FX-SLC-100MA-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM3FX-SLC-100MAO-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM3FX-SLC-100MBO-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM4FX-SLC-100MA-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4FX-SLC-100MAO-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM4FX-SLC-100MBO-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM4-SLC-1GA-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4-SLC-1GAO-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM4-SLC-1GBO-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM5-SLC-1GA-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM5-SLC-1GAO-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM5-SLC-1GBO-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
  • Secure, rock-solid FPGA-based design
  • 1000Base-LX and 1000Base-ZX – supported network speed: 1G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • Power supply via redundant 5V AC/DC power supply and/or 12-48V DC voltage
  • 100% passive without affecting the active network connection, no additional latency
  • Available in different split ratios – e.g. 50:50, 60:40, 70:30, 80:20, 90:10
  • Support breakout, aggregation and regeneration mode
  • 100% reaction-free due to galvanic isolation (data diode function)
  • Plug-n-Play – Operating mode change via DIP switch
  • Supports up to 16k Jumbo Frames
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE, EN 55032 KL. A/B, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 50121-4:2016*, EN 50129*

* Hardened TAPs

 
MAXIMUM INSERTION LOSS
Split Ratio (more on request) 50:50 60:40 70:30
Singlemode OS1, OS2 3.4 dB / 3.4 dB 2.5 dB / 4.5 dB 1.7 dB / 5.8 dB
shop online
Product brief
Data Sheet
quick user guide
OM4 MULTIMODE FIBER TAP MODELS – STANDARD
All TAPs for fiber type OM4 are also OM3 compatible!
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Network Fiber type Wave- length Split Ratio Interface NET. / MON. TAP Version
PRP-OM4-SLL 100M/1G/ 10G/25G OM4 850 / 1310 nm 50:50, 60:40 or 70:30 LC LC Single-TAP
PRP-OM4-DLL 100M/1G/ 10G/25G OM4 850 / 1310 nm 50:50, 60:40 or 70:30 LC LC Dual-TAP
PRP-OM4-SMM 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm 50:50, 60:40 or 70:30 MTP® MTP® Single-TAP
PRP-OM4-DMM 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm 50:50, 60:40 or 70:30 MTP® MTP® Dual-TAP
PRP-OM5-SLL 100M/1G/10G/25G/40G/50G/100G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC LC Single-TAP
PRP-OM5-DLL 100M/1G/10G/25G/40G/50G/100G OM5 850 – 950 nm 50:50, 60:40 or 70:30 LC LC Dual-TAP
PRP-OM5-SMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 MTP® MTP® Single-TAP
PRP-OM5-DMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 MTP® MTP® Dual-TAP
 
OM5 MULTIMODE FIBER TAP MODELS – STANDARD
All TAPs for fiber type OM5 are also OM4 compatible!
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Network Fiber type Wave- length Split Ratio Interface NET. / MON. TAP Version
PRP-OM5-SLL 100M/1G/10G/25G/40G/50G/100G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC LC Single-TAP
PRP-OM5-DLL 100M/1G/10G/25G/40G/50G/100G OM5 850 – 950 nm 50:50, 60:40 or 70:30 LC LC Dual-TAP
PRP-OM5-SMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 MTP® MTP® Single-TAP
PRP-OM5-DMM 100M/1G/10G/25G/40G/ 50G/100G/200G/400G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 MTP® MTP® Dual-TAP
PRP-OM4-SLL-S 100M/1G/ 10G/25G OM4 850 nm 50:50, 60:40 or 70:30 LC LC Single TAP
PRP-OM4-DLL-S 100M/1G/ 10G/25G OM4 850 nm 50:50, 60:40 or 70:30 LC LC Dual TAP
PRP-OM4-SMM-S 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm 50:50, 60:40 or 70:30 MTP® MTP® Single TAP
PRP-OM4-DMM-S 100M/1G/10G/ 25G/40G/50G/100G OM4 850 nm 50:50, 60:40 or 70:30 MTP® MTP® Dual TAP
  • Supported network speeds: 1G, 2.5G, 5G, 10G, 25G, 40G, 50G, 100G, 200G and 400G
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • 100% passive without affecting the active network connection, no additional latency
  • Available in different split ratios – e.g. 50:50, 60:40, 70:30, 80:20, 90:10
  • No power supply needed, 100% passive
  • Simple configuration via DIP switches
  • Plug-n-Play
  • Supports up to 16k Jumbo Frames
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10,6 cm x 3,5 cm x 16,4 cm / ca. 0,5 kg CE, FCC, RoHS, WEEE
MAXIMUM INSERTION LOSS
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
shop online
Product brief
Data Sheet
quick user guide
HYBRID OM3 MULTIMODE FIBER TAP MODELS – STANDARD
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard Network Fiber Type Wave- length Split Ratio Interface NET. / MON.
PRP-OM3FX-SLC 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM3FX-SLS 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4FX-SLC 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4FX-SLS 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM4-SLC 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM4-SLS 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC Multimode SFP
PRP-OM5-SLC 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode RJ45
PRP-OM5-SLS 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC Multimode SFP
HYBRID OM3 MULTIMODE FIBER TAP MODELS – HARDENED
If you need a TAP with DIN rail mounting clip, please order additionally the mounting clip PRP-DIN-CLIP! If you need a TAP with mounting frame front panel, please order additionally the front panel PRP-1U3-CLIP! (see “Mounting options“)
SKU Standard Network Fiber Type Wave- length Split Ratio Interface NET. / MON. OPERATING MODE(S)
PRP-OM3FX-SLC-100MA-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM3FX-SLC-100MAO-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM3FX-SLC-100MBO-S 100Base-FX 100M OM3 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM4FX-SLC-100MA-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4FX-SLC-100MAO-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM4FX-SLC-100MBO-S 100Base-FX 100M OM4 1310 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM4-SLC-1GA-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM4-SLC-1GAO-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM4-SLC-1GBO-S 1000Base-SX 1G OM4 850 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
PRP-OM5-SLC-1GA-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation, Breakout, Regeneration
PRP-OM5-SLC-1GAO-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Aggregation
PRP-OM5-SLC-1GBO-S 1000Base-SX 1G OM5 850 nm – 950 nm 50:50, 60:40 or 70:30 LC RJ45 Breakout
  • Secure, rock-solid FPGA-based design
  • Support 100M Multimode 100Base-FX and 1G Multimode 1000Base-SX
  • Alternative to SPAN ports – mirrors 100% of traffic including FCS/CRC errored packets that may be dropped by SPANs
  • Invisible on the network, no IP address, no MAC address, cannot be hacked
  • Guaranteed no packet loss
  • Power supply via redundant 5V AC/DC power supply and/or 12-48V DC voltage
  • Available in different split ratios – e.g. 50:50, 60:40, 70:30, 80:20, 90:10
  • 100% passive without affecting the active network connection, no additional latency
  • Support breakout, aggregation and regeneration mode
  • 100% reaction-free due to galvanic isolation (data diode function)
  • Plug-n-Play – Operating mode change via DIP switch
  • Supports up to 16k Jumbo Frames
  • Various mounting options available
  • Designed, assembled, certified and tested in Germany
DIMENSIONS (WxHxD) / WEIGHT CERTIFICATIONS
10.60 cm x 3.50 cm x 16.40 cm / ca. 0.5 kg CE, FCC, RoHS, WEEE, EN 55032 KL. A/B, EN 55035, EN 61000-3-2, EN 61000-3-3, EN 61000-6-2, EN 50121-4:2016*, EN 50129*

* Hardened TAPs

 
MAXIMUM INSERTION LOSS
Split Ratio (more on request) 50:50 60:40 70:30
Multimode OM3, OM4, OM5 3.8 dB / 3.8 dB 2.8 dB / 4.8 dB 2.2 dB / 6.1 dB
Datasheet - Hybrid MM 100M Fiber TAPs
User Guide - Hybrid MM 100M Fiber TAPs
Datasheet - Hybrid MM 1G Fiber TAPs
User Guide - Hybrid MM 1G Fiber TAPs
shop online
Product brief
Data Sheet
quick user guide
To install our portable TAPs in a server rack, you need our server rack mounting frame with item number PRP-1U3-V2, as well as a rackmount frame mounting kit (item number PRP-1U3-CLIP) for the TAP. The server rack mounting frame PRP-1U3-V2 provides space for up to 3 portable PacketRaven Network TAPs. Both components are available as accessories.
SKU DESCRIPTION
  PRP-1U3-V2 Server rack mounting frame for 3 portable TAPs
  PRP-1U3-BP-V2 Blank plate for mounting frame (see center in photo)
  PRP-1U3-CLIP TAP rackmount frame bracket for server rack mounting frame PRP-1U3-V2
  PRP-DIN-CLIP TAP DIN rail mounting clip

As a further alternative, we also offer a top-hat rail clip for our TAPs for mounting on a TS35/7.5 DIN top-hat rail. This clip can be rotated by 180° so that the connections of the TAP can be aligned according to the respective requirements.
This DIN rail clip, available as an accessory, has the item number PRP-DIN-CLIP.

SKU DESCRIPTION
  PRP-PS-INT Power supply with with interchangeable EU, UK, and US plug heads (Two of these power supplies are already included with every portable active Network TAP)
PRP-PS-EU Power supply with EU plug (head)
PRP-PS-UK Power supply with UK plug (head)
PRP-PS-US Power supply unit with US plug (head)
PRP-PS-*-A Plug head *EU, *UK or *US
  PRP-PS-C14-25W Switching power supply with C14 socket on input side according to IEC60320, to be connected to PDU via C13-C14 cable

NEOXPacketRaven Network TAPs basically support all MSA-compliant SFP transceivers!

A selection of the SFP transceivers we have already tested can be found in our SFP Transceiver Compatibility Overview.

SKU LINK CONNECTOR OPERATING TEMP. LLD1
  NX-SFP-TX-1G 1000Base-T RJ45 0°C to 70°C
  NX-SFP-SX-1G 1000Base-SX LC 0°C to 70°C
  NX-SFP-LX10-1G 1000Base-LX; 10 km LC 0°C to 70°C
  NX-SFP-LX20-1G 1000Base-LX; 20 km LC 0°C to 70°C
  NX-SFP-LX40-1G 1000Base-SX; 40 km LC 0°C to 70°C
  NX-SFP-ZX80-1G 1000Base-ZX; 80 km LC 0°C to 70°C
  NX-SFP-ZX120-1G 1000Base-ZX; 120 km LC 0°C to 70°C
  NX-SFP-ZX160-1G 1000Base-ZX; 160 km LC 0°C to 70°C
  NX-SFP-FX-100M 100Base-FX LC 0°C to 70°C
SKU FIBRE TYPE DIAMETER DESCRIPTION CABLE LENGTH
  NX-LC-Y-PC-OS2-1M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OS2-2M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OS2-3M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OS2-5M OS2* 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
  NX-LC-Y-PC-OM4-1M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OM4-2M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OM4-3M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OM4-5M OM4 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
  NX-LC-Y-PC-OM5-1M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 1m
  NX-LC-Y-PC-OM5-2M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 2m
  NX-LC-Y-PC-OM5-3M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 3m
  NX-LC-Y-PC-OM5-5M OM5 3.0mm Y-Kabel / Special Patchcord LC/PC-LC/PC Duplex 5m
* OS1 compatible

Deployment

Portable Network TAP

SERVICE & SUPPORT

Unparalleled Multi-Level Service & Support for Peace of Mind

All NEOX PacketRaven Network TAP come with NEOX SILVER Support and can be upgraded to GOLD Support for advanced replacement in case of a hardware failure.

check support